Carbon

Carbon

When types of 3D printer filament like PLA, ABS, PETG, and nylon are reinforced with carbon fiber, the result is an extremely stiff and rigid material with relatively little weight. Such compounds shine in structural applications that must withstand a wide variety of end-use environments.

The trade-off is the increased wear and tear on your printer’s nozzle, especially if it’s made of a soft metal like brass. Even as little as 500 grams of this exotic 3D printer filament will noticeably increase the diameter of a brass nozzle, so unless you enjoy frequently replacing your nozzle, consider using one made of (or coated with) a harder material.

WHEN SHOULD I USE CARBON FIBER 3D PRINTER FILAMENT?

Thanks to its structural strength and low density, carbon fiber is a fantastic candidate for mechanical  components. Looking to replace a part in your model car or plane? Give this 3D printer filament a try.

Filament - Push Plastic - CARBON FIBER Filament (1.75mm/2.85mm)
from $9.00

Push Plastic - CARBON FIBER Filament (1.75mm/2.85mm)

Push Plastic

PUSH PLASTIC CARBON FIBER (ABS/PETG/Nylon) Carbon Fiber ABS, PETG, and Nylon 10% Carbon Fiber fill on all Resins Added stiffness Improved dimensi...

View full details
from $9.00
M3D - Carbon Filament (1000FT Carbon 3D Ink®) - Project 3D Printers
Sold out
$68.99

M3D - Carbon Filament (1000FT Carbon 3D Ink®)

M3D

Carbon 3D Ink® is a blend between M3D’s PLA material and 33% of carbon fiber particles. M3D’s PLA-based Carbon Fiber filament offers unmatched str...

View full details
$68.99
Sold out
M3D - Carbon Filament (250FT Carbon 3D Ink) - Project 3D Printers
Sold out
$33.99

M3D - Carbon Filament (250FT Carbon 3D Ink)

M3D

Carbon 3D Ink® is a blend between M3D’s PLA material and 33% of carbon fiber particles. M3D’s PLA-based Carbon Fiber filament offers unmatched str...

View full details
$33.99
Sold out