Call or Text 1-833-202-5227
M-F 9:00am - 6:00pm ET
Call or Text
Here you'll find all of the odds and ends of 3D printing. Replacement parts, accessories, warranties, and replacement plans are all here in the OTHER section.
Have fun!!!!
Add (or renew) the Enhanced Support Plan for 1 Year for your Fusion3 3D printer. Please note: that this does not extend your warranty. It only pro...
View full detailsExtruder Cable A cable connecting extruder with motherboard. Dedicated for: Zortrax M300 Zortrax M300 Plus Description A cable connecting ext...
View full detailsExtruder Cable with Adaptor Cable connecting extruder with motherboard. Dedicated for: Zortrax M200, Zortrax M200 Plus Description Cable conne...
View full detailsZortrax - Perforated Plate (For M200 Plus) Perforated build plate for M200 Plus. Dedicated for: Zortrax M200 Plus Description Perforated build ...
View full detailsZortrax - Radial Fan Cooler Radial fan cooler for Zortrax M200 Plus. Dedicated for: Zortrax M200 Plus Zortrax M300 Plus Description A radial...
View full detailsFan Coolers Set of (2) fan coolers for Inventure 3D printer. Dedicated for: Zortrax Inventure Description A set of 2 spare fan coolers dedica...
View full detailsNozzle Cap Set of 4 teflon nozzle cap Dedicated for: Zortrax M200 PlusZortrax M300 Plus Zortrax M300 Dual A set of spare teflon nozzle cap...
View full detailsNozzle Set Set of 6 spare parts for Inventure 3D printer and M300 Dual. Dedicated for: Zortrax Inventure and M300 Dual Description A set that c...
View full detailsOffering peace of mind beyond the standard MakerGear warranty, the MakerGear Protection Plan extends your printer's warranty for an additional 12...
View full detailsBrass Suited for the V4 Hot End, this nozzle is precision-machined from brass and is available in four different extrusion diameters: 0.25 mm. 0....
View full detailsV4 HOT END Not to be confused with "The V4 Extruder Upgrade Kit", this V4 Hot End ships fully-assembled, ready-to-install, and includes: 1 - V4...
View full detailsThis thermistor (temperature sensor) is suitable for both the V3b and the V4 Hot Ends. If Hot End's temperature display seems to be inaccurate, a ...
View full detailsThe cartridge heater is a replaceable heating element in the V4 Hot End. If your Hot End is not able to maintain temperature, it might be time to ...
View full detailsThe V4 filament drive, a central part of the V4 extruder, interfaces with the extruder motor. It is made of ABS plastic and includes all hardware...
View full detailsMade from borosilicate glass, this 8" x 10" x 0.13" (20 cm x 25 cm x 3.3 mm) pane provides a perfect print surface when properly coated in a film o...
View full detailsExtruder Motor with Drive Gear
Made from low-friction PFA, 2 mm inside diameter guide tubes areperfect for minimizing bending and friction against your filamentmaterial. Our 18" ...
View full detailsThis fan is the smaller of the two fans mounted in front of the extruder and is also used inside the electronics case. These fans have a keyed con...
View full detailsMounted at a 45 degree angle in front of the extruder's 40 mm fan, this 50 mm fan provides users with greater control over the cooling rate of ext...
View full detailsThough small, this little thing packs a serious punch! From reading G-Code stored your SD card or computer, to relaying those coded commands to th...
View full detailsThe BL Touch is a standard feature on the M3-ID and the M3-SE. One ofthe probe's two functions is to help users level the bed. The otherfunction is...
View full detailsThe V4 Spare Parts Set is ideal for international customers and others who wish to maximize uptime by stocking spare parts, and includes: 1 - V4 ...
View full detailshe MakerGear LCD Interface (with integrated SD Card Reader) is a perfect upgrade item for those who wish to control their printer without the use ...
View full detailsZortrax M300 Plus HEPA Cover A filtering device for M300 and M300 Plus. Device features: Compatible with Zortrax M300, M300 Plus and other 3D p...
View full details