Call or Text 1-833-202-5227
M-F 9:00am - 6:00pm ET
Call or Text
Extruder Motor with Drive Gear
MAKERGEAR M2 3D PRINTER THE ORIGINAL WORKHORSE We know that high precision print quality, especially over time, can’t exist without high-quality c...
View full detailsThis fan is the smaller of the two fans mounted in front of the extruder and is also used inside the electronics case. These fans have a keyed con...
View full detailsMounted at a 45 degree angle in front of the extruder's 40 mm fan, this 50 mm fan provides users with greater control over the cooling rate of ext...
View full detailsAvailable in 1 kg spools and a wide array of colors (black, white, natural, red, blue), MakerGear ABS (a crylonitrile butadiene styrene) filament ...
View full detailsThe BL Touch is a standard feature on the M3-ID and the M3-SE. One ofthe probe's two functions is to help users level the bed. The otherfunction is...
View full detailsMade from borosilicate glass, this 8" x 10" x 0.13" (20 cm x 25 cm x 3.3 mm) pane provides a perfect print surface when properly coated in a film o...
View full detailsMade from low-friction PFA, 2 mm inside diameter guide tubes areperfect for minimizing bending and friction against your filamentmaterial. Our 18" ...
View full detailshe MakerGear LCD Interface (with integrated SD Card Reader) is a perfect upgrade item for those who wish to control their printer without the use ...
View full detailsThough small, this little thing packs a serious punch! From reading G-Code stored your SD card or computer, to relaying those coded commands to th...
View full detailsMAKERGEAR M3-ID 3D PRINTER M3-IDs are in stock and ready to ship! Made in the USA INDEPENDENT HEADS, DOUBLE THE OUTPUT The MakerGear M3-ID has ch...
View full detailsMakerGear M3-SE 3D Printer READY TO RUN, BUILT TO LAST The MakerGear M3-SE desktop 3D printer is the embodiment of both performance and reliabili...
View full detailsMAKERGEAR MICRO 3D PRINTER KIT 4-6 week lead time. Kits ordered today will ship in time for Christmas! This 3D printed 3D printer is designed to be...
View full detailsAvailable in 1 kg spools and a wide array of colors, our PLA (Polylactic Acid) filament measures 1.75 mm in diameter and is one of the easiest fil...
View full detailsOffering peace of mind beyond the standard MakerGear warranty, the MakerGear Protection Plan extends your printer's warranty for an additional 12...
View full detailsThis thermistor (temperature sensor) is suitable for both the V3b and the V4 Hot Ends. If Hot End's temperature display seems to be inaccurate, a ...
View full detailsThe cartridge heater is a replaceable heating element in the V4 Hot End. If your Hot End is not able to maintain temperature, it might be time to ...
View full detailsThe V4 filament drive, a central part of the V4 extruder, interfaces with the extruder motor. It is made of ABS plastic and includes all hardware...
View full detailsV4 HOT END Not to be confused with "The V4 Extruder Upgrade Kit", this V4 Hot End ships fully-assembled, ready-to-install, and includes: 1 - V4...
View full detailsBrass Suited for the V4 Hot End, this nozzle is precision-machined from brass and is available in four different extrusion diameters: 0.25 mm. 0....
View full detailsThe V4 Spare Parts Set is ideal for international customers and others who wish to maximize uptime by stocking spare parts, and includes: 1 - V4 ...
View full details