It says it can engrave leather but can it cut it. Suede and faux as well.
Yes, suede and faux have similar properties as leather, so engraving them shouldn't be an issue. Since those materials are not on the approved list theirs setting for laser power and speed with have to be tuned by trial and error, but start with the setting for leather and adjust from there.
Can this printer engrave the inside and outside of a ring? If so what other pieces of equipment would be needed? We are ring makers and looking to expand into engraving! Also would you be able to email pricing. Thank you
The FLUX beamo is certainly capable of engraving the outer portion of a ring. Please see the mateiral chart for recommended materials for engraving. I'm uncertain how the beamo, or any laser engraver, would be able to engrave the inner ring if the ring is already closed. For that I would have to defer to a jeweler or someone with more experience in the field.
Can this machine cut 0.205 in plywood? I have been cutting children's wooden jig saw puzzles by hand with a scroll saw and am thinking of automating this process. What width of cut is typical for this kind of cut?
In a single pass, the Flux beamo 30W cuts wood 3mm, or 1/8 inch. For deeper cuts the power can be strenghthened or more passes can be done.
All materials and engraving/cutting parameters on this page.
Can this machine cut and etch styrene plastic? Also can it burn holes small enough to fish 0.010" fiber optic wire thru? I'm a small scale model builder wanting to scratch build custom parts. Thanx, Dan.
Thank you for your question: According to FLUX, this is what the 30w beamo guarantees that it can cut. Other customers have been able to do other things beyond the exact specifications, but this is what FLUX stands by for this product. You may need the stronger, more powerful Beambox.
"beamo can cut and engrave wood, leather, cardboard, acrylic, rubber, foods, and more. The maximum cutting thickness is 5mm (varies by materials). beamo can also engrave on anodized aluminum and stainless steel, but the power levels are not enough to cut these materials."
Can the 30W engrave metal, specifically aluminum and brass?
It can engrave anode metal and stanless steel with a diode laser. This link notes which materials can be cut and which can be engraved. https://flux3dp.com/beamo/
Is the hybrid laser add on required to engrave on metal?
Yes and no, So the Hybrid laser will allow for surface etching on metal, but the standard laser is capable of using materials like Ceramark, or Brilliance inks to burn a ceramic paint into the metal now obviously this isn't really etching more of a transfer process, but the result is beautiful like the black writing on a Yeti cup unbelievably durable and vibrant, you simply spray it on, laser the graphic, then use a wet rag to wipe of the paint where the laser didn't hit, this results in a baked on ceramic.
Description
Features
Tech Specs
Videos
Applications and Images
Resources and Warranty
Reviews
Shipping & Returns
Price Match
Description
Introducing the FLUX beamo (30W) Laser Cutter
ATTENTION: UPGRADE ALERT
The Flux vent hose has been upgraded for all models. Its new and improved features include:
· A brand-new gray coloring that, with its darker complexion, will make it look less dusty and more aesthetically appealing.
· An embossed FLUX logo mid center the upper-tubing to flex— or should we say Flux? – some branding to richen the appearance.
· Altered length from the previous vent house model— this new vent house is roughly 1.6m or approximately 160 cm!
Laser cutting and engraving will never be the same! Introducing the world's smallest CO2 laser printer and engraver. With its affordable price, compact design, and small footprint of just four letter-sized sheets of paper, beamo packs the same powerful features found in professional laser cutters, and is still suitable for small businesses, classrooms, and home.
It features a powerful 30-watt CO2 laser, that can cut and engrave on organic materials, and is capable of engraving on select metals. Users of any experience level will enjoy the intuitive interface, easy to use software, and the included tutorials, making it easy to begin creating like a professional.
FLUX beamo - The world’s smallest CO2 laser cutter/engraver30 W CO 2 laser made by FLUX as seen on kickstarter
Compact
Small footprint of just four letter-sized sheets of paper. The friendly price and compact design make beamo suitable for any home, school, or small business.
Powerful
beamo packs features found in professional industrial laser cutter
Features
Camera alignment - Use the built-in HD camera to preview the work area and the workpiece on your laptop or phone. Place your design exactly where you want, and get exactly what you expect.
Internal water-cooling - The closed-loop water cooling system circulates water throughout the machine, keeping the components at the proper temperature at all times.
High resolution laser - beamo uses a laser that is smaller than the width of a human hair and engraves with 0.05mm layer depth. The 1,000 DPI resolution will amaze you.
Autofocus (add-on) - Focus will be adjusted according to the thickness of the material, enabling beamo to cut deeper in multiple passes.
Rotary (add-on) - Unlock beamo's 3D potential and engrave on curved objects like glassware and bottles. The rotary module spins the workpiece. This easy-to-install add-on opens up whole new creative dimensions.
Hybrid laser (add-on) - Combination of diode laser and CO2 laser improves cutting speed and efficiency.
Wi-Fi Connection, Anytime, Anywhere
beamo brings out the best of wireless technology by fast setting, file transfer, and monitoring of work status. No matter where you are, via WIFI, beamo is at your disposal.
Camera Preview - What You See Is What You Make
Simply take a snapshot before you print. Build-in camera allows you to preview your design on any material. Place your design with your mouse or finger and position it exactly where you want.
Design Software Supported
Compatible with JPG / PNG / SVG / DXF, so just use the graphics editor that is best for you, Adobe Illustrator, Autocad, Inkscape, CorelDraw, even Microsoft Word!
Hassle Free Software & App
FLUX’s in-house developed software Beam Studio & iOS/Android app BeamCam provides a one-stop design experience. Edit texts and vector files, modify bitmap images, align, distribute objects, and many more.
Effortless printing experience, makes it quick and easy
What Can You Make with beamo?
Craft Your Favorite Material
Users can shape, cut, and engrave on an enormous range of materials including wood, leather, acrylic, fabric, cardboard, stainless steel, anode metal, glass, cement, and much more.
Features
Fits Perfectly into Your Workspace
Taking up only the footprint of four letter-size papers and weighing less than 50 pounds, beamo blends in with your design studio or working table.
Safe for Home and School
beamo is fully enclosed, and it automatically pauses if the lid is opened during a task. If an emergency occurs, you can shut down the machine immediately with a single switch.
Powerful Features
Camera alignment Use the built-in HD camera to preview the work area and the work-piece on your laptop or phone. Place your design exactly where you want, and get exactly what you expect. Internal water-cooling The closed-loop water cooling system circulates water throughout the machine, keeping the components at the proper temperature at all times. High resolution laser beamo uses a laser that is smaller than the width of a human hair and engraves with 0.05mm layer depth. The 1,000 DPI resolution will amaze you. Autofocus (optional add-on) Focus will be adjusted according to the thickness of the material, enabling beamo to cut deeper in multiple passes. Rotary Attachment (optional add-on) Unlock beamo's 3D potential and engrave on curved objects like glassware and bottles. The rotary add-on spins the work-piece. This easy-to-install add-on opens up whole new creative dimensions. Hybrid laser (optional add-on) Combination of diode laser and CO2 laser improves cutting speed and efficiency.
What You See Is What You Make
Camera Preview Simply take a snapshot before you print. Build-in camera allows you to preview your design on any material. Place your design with your mouse or finger and position it exactly where you want.
Wi-Fi Connection
Anytime Anywhere beamo brings out the best of wireless technology by fast setting, file transfer, and monitoring of work status. No matter where you are, via Wi-Fi, beamo is at your disposal.
Hassle Free Software & App
FLUX’s in-house developed software Beam Studio & iOS/Android app Beam Go provide a one-stop design experience. Edit text and vector files, modify bitmap images, align, distribute objects, and much more.
Design Software Supported
beamo is compatible with JPG / PNG / SVG / DXF, so you're free to use whatever graphic design software you're most comfortable with. See our list of software options in the Helpful Resources section below.
Tech Specs
GENERAL
Dimensions:24.21" x 17.52" x 6.97" (615 x 445 x 177 mm) Weight:48.5 lbs (22 kg) Power:AC 110V Touch Panel:1024 x 600 LCD Camera:HD CMOSI/O:Wi-Fi / Ethernet Camera Preview Area:11.81" x 7.68" (300 x 195 mm)
STANDARD MODE
Work Area:11.81" x 8.27" (300 x 210 mm) Work Area Depth:1.77" (45 mm)
BORDERLESS MODE
Work Area:10.23" x 8.27" (260 x 210 mm)
LASER
Spec:30 W CO2 Laser Cutting Thickness:0 - 5 mm (varies by material) Moving Speed:0 ~ 300 mm/s Maximum Material Height:45 mm
SOFTWARE
Graphic File Types:Vector / Image (monochrome, gray scale) Supported Operating Systems:Windows / macOSX / Linux / Chrome OS File Types:JPG / PNG / SVG / PDF / DXF
beamo is a small desktop CO2 laser cutter and engraver. It features a powerful 30-watt CO2 laser, that can cut and engrave on organic materials and even engrave select metal. With its revolutionary design and intuitive user interface, you’re just steps away from having fun making amazing things.
2. Will beamo be difficult to set-up? beamo supports file formats you’re familiar with, such as JPG, PNG, SVG and DXF, and our software is very easy to use. With the included tutorial, you will be making things in no time!
3. I’m new to all this, what if I have some questions? You can easily find answers to the most common questions in our Help Center, which we update regularly. You can also contact our customer support online and our support team will be more than happy to help you.
4. What is the warranty? We provide a 12-month warranty for beamo and 3-month warranty for the laser. If you’ve encountered an issue, please contact our technical staff, so we can determine a suitable fix. Parts and tutorials will be provided if needed, and for the cost of shipping.
About Hardware
1. How do I vent the machine?
beamo is equipped with an air pump and a powerful exhaust. The air pump prevents the material from catching fire while the exhaust extracts smoke and fumes.
2. What is the size of the work area?
The work area is 11.8” x 8.2” x 1.7“ (30 cm x 21 cm x 4.5 cm). There’s a honeycomb structure tray for materials that are up to 1.18” (3 cm) thick. The tray can be adjusted manually or removed to accommodate materials up to 3.15” (8 cm) thick.
3. Does beamo come with a honeycomb cutting platform?
Yes. The platform is manually detachable, freeing up an additional 22mm for materials when removed. With the beamo open-bottom kit, then there are no limits to the thickness of the materials.
4. Where should I put my beamo?
The laser creates smoke and fumes when operating, so we recommend you pick a well-ventilated location and use the included exhaust hose for outdoor venting.
5. What maintenance procedures are there?
To ensure continuous quality laser engraving or cutting, check and clean the lenses and mirrors regularly. Usually once every week, but it depends on usage and frequency. Lubricate the rails and check the water level of the cooling tank regularly.
6. Are there any consumables?
For general use, the CO2 laser tube lasts 6 months to 1 year. The lenses and mirrors lasts 1 year or more under regular maintenance. If replacement is necessary, you can refer to our tutorial to change the parts on your own. We’re still working on pricing and we will update this information as soon as possible.
About Laser
1. What's the wattage of the laser tube?
beamo is equipped with a 30W CO2 laser tube operating at 10,640-nm on average.
2. What materials can beamo cut and engrave?
beamo can cut and engrave wood, leather, cardboard, acrylic, rubber, foods, and more. The maximum cutting thickness is 5mm (varies by materials). beamo can also engrave on anodized aluminum and stainless steel, but the power levels are not enough to cut these materials.
3. Is it possible to cut deeper than the maximum cutting thickness stated in the specs?
Yes. The maximum cutting thickness stated in the specs is for a single cut with at average speed. If you slow down the speed or re-do the cut, you can cut thicker pieces. For example, the maximum cutting thickness for acrylic is 5mm, but you can cut 10mm or thicker acrylic if you slow down the speed or re-cut several times.
4. Does the camera cover the complete work area?
Almost, the camera will miss the upper margin by 1cm. Please see the specs for the exact dimensions.
5. What safety precautions should I take?
beamo is designed with various safety features, such as open lid detection and emergency shutdown. Nevertheless, it is best never to leave beamo unattended while it’s operating.
6. Can beamo cut metal?
The power levels are not high enough to cut metal, but beamo can etch anodized aluminum and stainless steel with our specialized coating.
7. What is FLUX Stainless Steel coating?
You can engrave on stainless steel with beamo only when it is coated with our specialized coating. Before you start, cover the material with the coating first for lasting results.
About Software
1. Is Beam Studio free?
Yes, it is completely free. You’re more than welcome to download it even before receiving your beamo. We’d love to hear your feedback!
2. What file types does Beam Studio support?
Beam Studio is compatible with JPG, PNG, SVG, and DXF file formats.
3. What is the touch panel for?
You can start, pause, and stop a task, control, and monitor your beamo’s status, all with a touch of a finger.
4. Can beamo operate independently?
If you import the files to Beam Studio first, the files will be uploaded to beamo before starting the task, so you can disconnect your computer from beamo anytime after you start a task. You can also import files to beamo directly using USB or choose from the recent task list on the touch panel.
5. How to connect beamo with my laptop?
You can connect via Wi-Fi, Ethernet, or smartphone hotspot
6. What operating systems does Beam Studio support?
Beam Studio is compatible with Windows, macOS, Linux, and Chrome OS.
We provide a 12 month warranty for Beamo, Beambox, & Beambox Pro with a 3 month for the laser tube. If you’ve encountered an issue, please contact our technical staff, and our staff will determine the suitable fix. Parts and tutorials will be provided if needed, shipping will be charged. Flux Warranty in Detail
Support
Direct all support inquiries towww.fluxsupportusa.com. Submit a request and someone will get back to you within 24 hours.
Warranty Policy
During the production process, FLUX Technology Inc. ("we") examines FLUX products strictly to ensure the quality and reliability of the products before delivery to the customer. Nevertheless, under certain circumstances, products may not perform as expected. If any problem occurs, please contact FLUX technical support to diagnose the problem.
Before contacting technical support, please make sure you have followed the setup instructions on the FLUX Help Center.
Scope of Warranty
We offer a non-transferable limited warranty that covers products purchased from an authorized FLUX Technology Inc. retailer against defects in materials or workmanship. Customers must provide serial number and related information as proof of purchase.
During each product’s warranty period, we offer the option of sending parts to customer and tutorials for repair, provided that:
The product was properly used according to the manufacturer’s intended purposes and instructions.
The product was not damaged due to acts of nature, such as lightning, flood or fire.
The product’s casing was never disassembled and the warranty seals are not broken.
Note: Particles, scratches, unevenness, or other appearance issues which do not affect the function of the machine, are not covered by the warranty and cannot be replaced.
If the customer wish to ship the machine back to FLUX for repair, the customer is responsible for all shipping costs.
Warranty Period
The warranty starts from the date of delivery to the end-user purchaser.
Please see the chart below for the warranty periods of the products.
Product Warranty Period
beamo 1 year
Laser Tube 3 month
Disclaimer
FLUX Inc. warrants only the hardware (excluding accessories and spare parts) against defects in materials and workmanship when used as instructed in the manual. FLUX Inc. does not warrant against normal wear and tear, items consumed or expended by their normal use, product misuse, accidental damage, or damage caused by modifications to the product. Modification of the hardware or accessories, including but not limited to replacing parts, making permanent cosmetic changes to the machine, replacing the software or firmware, or other unauthorized changes voids this Limited Warranty.
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase. As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment.
Order Shipment:
If your order is in stock and we process the charges to your credit card, it will ship within five business days from the date of your order. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at sales@Project3DPrinters.com.
Cancellations & Refunds/Returns:
Before accepting a return on a product that isn't functioning as it should, Project 3D Printers reserves the right to exhaust any and all means to resolve and/or repair the malfunction through technical support and replacement parts provided by both the manufacturer and Project 3D Printers. No return will be accepted without reasonable attempts to resolve the issue(s) first. All returned products must be returned within 10 days of date of purchase.
Project 3D Printers enforces a strict "No Returns Accepted" policy for opened and/or partially used products, including filament, resin, or any consumable of any size and weight that has been used or opened from its factory and vacuum seal. Only products and consumables that are unused, and in brand new factory condition are eligible for return to the manufacturer of origin within 10 days of the purchase date.
If a product is found to be non-functional or defective, the product must be returned with its full original contents within 10 days of the delivery date for inspection of the non-functionality. If the product is found to be defective or non-functional a full-refund will be given, not including return shipping at the customer's expense.
All orders cancelled after 48 hours are subject to a $20 administration fee, whether or not your order has shipped. If you order has shipped, you (the buyer) will also be responsible for actual return shipping charges. Refunds will only be issued to the original credit card that you use when placing your order. Buyer is responsible for and pays a 20% restocking of the value of the returned item(s). Buyer pays all shipping fees for the returned item(s).
Customs Fees, Tariffs, Duty Fees and Import Taxes:
Only customers are responsible for their local import taxes, tariffs, duty fees and import taxes incurred during shipping. To know about your customs import duties please contact your local customs office with this details (HS Code :8477 Product description: 3d printer or 3d printer kit). If the tax amount is high, we can provide assistance to reduce it.
Price Match
We work very hard to ensure that we offer the absolute best prices online. If you find another online store that offers a lower price than us within six months of your purchase date please let us know and we will refund your original payment for the difference. We want you to feel confident that you are getting the absolute best price for the product you are ordering. If you find that our own website has a lower price for the same item you have ordered within six months of your purchase date will refund the difference as well.
To request your partial refund simply e-mail us a link to the same product on our website, or on our competitors website within six months from the date of your order and we will process the credit accordingly.
Our 100% Price Guarantee has some limitations:
You must purchase the item from our website before requesting your Price Match Guarantee
Promotions such as rebates and buy one, get one free offers are not eligible
The item must be in stock on the competitors website
The competitor must be an online store, they may not have a retail location
The website can not be a discounter or auction website (ie; eBay, overstock, etc..)
The competitor must be an Authorized Retailer of the product in question
The Price Match Guarantee includes the item price and the shipping charges, it excludes sales tax
Skip to content
