Call or Text 1-833-202-5227
M-F 9:00am - 6:00pm ET
Call or Text
Be the first to ask a question about this.
The re-engineered LulzBot TAZ Dual Extruder v3.1 Tool Head is back by popular demand to take your designs to the next level. Improved air flow at the heat sink means this trusty Tool Head is now even more prepared to utilize dedicated support material like PolyDissolve S1, that dissolves and separates in water, freeing you to focus on the function of your design rather than on how to make it 3D printable.
This dual filament extruder does not require nozzle leveling or offset calibration, is lighter and more compact than its predecessor, and features improved heat sink and part cooling. With hassle-free hardware, integrated software, and water-soluble support material, who knew geometric freedom could be this easy?
LulzBot TAZ 3D Printer, v6.0 Boxed for Retail, NA
The popular LulzBot TAZ Dual Extruder v3.1 was re-engineered with a focus on improving air flow at the heat sink for greater efficiency when printing. The Dual Extruder v3.1 enables 3D printing complex geometry that would normally require time spent removing same-material supports with a risk of breaking your print and almost always leaving evidence of the support in imperfect bottom surfaces. With water-soluble supports like PVA, let the water do the work and enjoy clean and accurate bottom surfaces.
The Dual Extruder v3.1 features a unibody heatsink and redsigned fan mount with two hot ends co-developed with E3D, makers of the ever popular line of all-metal hot ends. The precision-machined design brings the hot ends closer together, resulting in a dual extruder with no need for nozzle leveling or offset calibration. Just install the tool head and accessories, quickly flash firmware with Cura LulzBot Edition, and start printing.
The Dual Extruder v3.1 comes with everything you need to install on your LulzBot TAZ 5/6, including an extra wide wiper pad mount that enables your Dual Extruder v3.1 to work flawlessly with LulzBot self-cleaning and self-leveling technology.
The Dual Extruder v3.1 was specifically designed for 3D printing models with soluble support material, which is the primary reason LulzBot users want dual extrusion. Soluble support allows freedom of design which means better rapid prototypes and better efficiency. We have had many questions about the v3.1’s ability to do other kinds of dual extrusion printing:
Question 1: Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print in two colors of the same material?
Answer: Yes, absolutely, however the print profiles built into Cura LulzBot Edition have not been optimized for multicolor printing. If multicolor printing is your goal, you may need to make modifications to the included profiles for optimal results. We have included all LulzBot supported material base profiles under the Experimental classification in Materials as a good starting point.
Question 2: Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print flexible materials?
Answer: Yes, the Dual Extruder v3.1 is capable of printing flexible materials. Through our internal testing, we have found that PolyDissolve S1 and PVA stick very well to TPU’s (flexible filaments), but the profiles have not yet been fine-tuned for optimal cosmetic results. Because of this, all of our flexible material profiles have been included in the Experimental section of Cura LulzBot Edition as a starting point for making your own modifications. Printing with flexible materials is recommended for advanced users on the Dual Extruder v3.1.
Question 3: Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print solid and flexible materials together?
Answer: Yes, the hardware of the Dual Extruder v3.1 is capable of printing solid and flexible material together, but the profiles have not been optimized for reliability or cosmetic results. Because of this, all of our flexible and solid material profiles are included in the Experimental section of Cura LulzBot Edition Materials, and can be used as a good starting point for making your own modifications. Printing with flexible and solid materials is recommended for advanced users on the Dual Extruder v3.1.
(1) LulzBot TAZ Dual Extruder Tool Head v3.1 (Fully Assembled)
(1) 3D Printed Z-axis endstop extension mount (for TAZ 6)
(1) Machined Z-axis endstop extension (for TAZ 6)
Note: The Z-axis Toggle Extension and Mount should only be used on a TAZ 6 with the Dual Extruder v3.1 Tool Head. Leaving this extension on the printer and using it with other tool heads will cause failed probes due to the higher registered minimum position.
(1) Dual v3 wiper mount
(1) Additional spool arm
(1) Feed tube spinner
(1) T-nut holder jig
(1) Idler jig
(4) Wire tie
(4) 3D printed low profile bed corners (For TAZ 5)
(1) Extruder wiring harness for second extruder
(1) M5 washer (Black)
(1) M5 x 14 mm socket head cap screw
(1) Filament Feed tube
(1) Sample length of Polylite PLA
Required filament diameter: 2.85mm diameter
Hot end temperature range: 120°C - 300°C
Nozzle diameters: 0.5mm
Required power system: 24 Volts
Fans: Two 24v 40mm axial fans for extrusion cooling, one 5v 40mm axial fan for heat-sink cooling
Weight: 0.96 kg (2.11 lbs)
Resources & Documentation
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase. As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment.
If your order is in stock and we process the charges to your credit card, it will ship within five business days from the date of your order. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at sales@Project3DPrinters.com.
Cancellations & Refunds/Returns:
Before accepting a return on a product that isn't functioning as it should, Project 3D Printers reserves the right to exhaust any and all means to resolve and/or repair the malfunction through technical support and replacement parts provided by both the manufacturer and Project 3D Printers. No return will be accepted without reasonable attempts to resolve the issue(s) first. All returned products must be returned within 10 days of date of purchase.
Project 3D Printers enforces a strict "No Returns Accepted" policy for opened and/or partially used products, including filament, resin, or any consumable of any size and weight that has been used or opened from its factory and vacuum seal. Only products and consumables that are unused, and in brand new factory condition are eligible for return to the manufacturer of origin within 10 days of the purchase date.
If a product is found to be non-functional or defective, the product must be returned with its full original contents within 10 days of the delivery date for inspection of the non-functionality. If the product is found to be defective or non-functional a full-refund will be given, not including return shipping at the customer's expense.
All orders cancelled after 48 hours are subject to a $20 administration fee, whether or not your order has shipped. If you order has shipped, you (the buyer) will also be responsible for actual return shipping charges. Refunds will only be issued to the original credit card that you use when placing your order. Buyer is responsible for and pays a 20% restocking of the value of the returned item(s). Buyer pays all shipping fees for the returned item(s).
Customs Fees, Tariffs, Duty Fees and Import Taxes:
Only customers are responsible for their local import taxes, tariffs, duty fees and import taxes incurred during shipping. To know about your customs import duties please contact your local customs office with this details (HS Code :8477 Product description: 3d printer or 3d printer kit). If the tax amount is high, we can provide assistance to reduce it.
We work very hard to ensure that we offer the absolute best prices online. If you find another online store that offers a lower price than us within six months of your purchase date please let us know and we will refund your original payment for the difference. We want you to feel confident that you are getting the absolute best price for the product you are ordering. If you find that our own website has a lower price for the same item you have ordered within six months of your purchase date will refund the difference as well.
To request your partial refund simply e-mail us a link to the same product on our website, or on our competitors website within six months from the date of your order and we will process the credit accordingly.
Our 100% Price Guarantee has some limitations: