Call or Text 1-833-202-5227
M-F 9:00am - 6:00pm ET
Call or Text
Be the first to ask a question about this.
Our projected schedule for being able to ship out Element is currently between Q2 and Q3 of 2022.
Element and Element HT are Mosaic’s first standalone 3D Printers. Element sets itself apart from the competition by integrating multi-material capabilities directly into the printing process while also automating filament management and run-out detection. Element/HT is capable of printing up to 8 materials/colors in a single part. These achievements were made possible by the introduction of Palette X and Mosaic Material Pods, which unlock a high level of automation not yet seen on printers of this caliber.
Both Models Include:
Hot End: 500°C
Heated Bed: 120°C
Actively Heated Chamber: 90°C
8 Mosaic Material Pods
Materials: Nylon, CF Nylon, ABS, PLA, PETG, TPU, PVA, HIPS, PEEK, PEKK, Ultem 9085
BEST-IN-CLASS PRINTER FOR PERFORMANCE, UPTIME & PRODUCTIVITY
Experience a new level of 3D printing potential with Mosaic’s new multi-material & multicolour 3D printer.
Element expands on what we’ve learned from Palette and integrates it into a seamless workflow - from an idea to reality. A Palette X within Element makes it possible to print up to 8 materials and colours in a single part. By using CANVAS slicer software, Mosaic Material Pods and Materials, Element automates the entire process.
Features and benefits of Element include:
COMPATIBLE SELECTION OF MOSAIC MATERIAL
Mosaic Materials used in tandem with Mosaic’s Material Pods allows Element to achieve automated filament management while ensuring long-lasting reusability.
Element will be capable of printing a selection of Mosaic Materials, including:
Element will print third party materials as well, only without the benefit of automated filament loading.
MULTI-MATERIAL MANAGEMENT & AUTOMATED WORKFLOW EXPLAINED
As mentioned above, using Mosaic Materials and Material Pods with Element allows you to automate your workflow.
Each Material Pod contains a motor which feeds filament from the Pod to Palette X, and onwards to the print head. Unlike our standalone Palette device, Palette X does not splice the materials. The reason for this is that when using multiple combinations of different material types, splicing becomes less reliable. Element, along with Palette X, has full control over material management and therefore does not require splicing. This promotes higher quality prints while also resulting in less material waste.
Element is also cloud connected to CANVAS. This means creating, editing, organizing and slicing your multi-material models and sending them to the printer is extremely easy. What could once take up to an hour or more becomes a process reduced to a matter of minutes.
With a build volume of 14” 3, you’re able to maximize productivity and print several pieces at once, in different colors and materials.
Printing in multicolor with Element is just as easy as printing in one. The option to have 8 colors on deck at any time means the possibilities are endless.
Element’s cloud connectivity to CANVAS optimizes the user experience and allows full control over your projects conveniently from the printer itself.
A modular design makes it easier than ever to remove your print head for repairs or a swap, and reinstalling it is just as simple!
CANVAS is Mosaic’s simple and easy-to-use slicer software. CANVAS comes free for a single user and CANVAS TEAMS will be available for those with a larger workforce, allowing effective collaboration.
Q: Can I purchase an Element (HT) and install it in an Array if I decide to purchase one in the future?
A: Unfortunately due to the construction and UI of the standalone Element/HT printer, the user is not able to insert a standalone printer for use inside the Array. The main issues that stop this from happening are the filament pods on the side of the printer (Standalone) vs the back (Array), the Industrial Design of the Casing, as well as the Element Screen, and different door designs for the standalone Element and the Element in Array.
Q: Can you use 3rd party materials with Element (HT)?
A: Mosaic Material Pods are not compatible with 3rd party materials. Material pods and Mosaic materials are required to run multi-color and multi-material prints for Element and Element HT; however, side-loading 3rd party filament can be used with single material prints and with automated runout detection/correction.
Q: What is the nozzle type on the Element (HT)?
A: Hardened steel nozzle.
Q: Is the Extruder all metal? and if so is it on both the Element and Element HT?
A: Both the Element and the Element HT extruders are all metal with hardened steel nozzles and components for reliable printing of abrasive materials (including carbon fiber Nylon). The Element hot end will go up to 350°C while the Element HT hot end will go up to 500°C, in conjunction with a heated chamber of up to 80°C which allows for printing high performance materials such as Ultem 9085 and PEEK. Additionally, this heated chamber helps increase the print quality and strength of lower temp materials, such as Nylons and ABS.
Q: What is the Firmware/Software for the Element?
A: Firmware: Marlin Based Software: Canvas3d.io
Q: Is the Extruder all metal? and if so is it on both the Element and Element HT?
A: Both the Element and Element HT extruders are all metal with hardened steel nozzles and components for reliable printing of abrasive materials (including carbon fiber Nylon). The Element hot end will go up to 350°C while the Element HT hot end will go up to 500°C in conjunction with a heated chamber of up to 80°C which allows for printing high performance materials such as Ultem 9085 and PEEK. Additionally, this heated chamber helps increase the print quality and strength of lower temp materials, such as Nylons and ABS.
Q: How does the Element connection work?
A: The Element to computer connection is being done through CANVAS. Element can connect over ethernet or wifi, but it does need to be online through the internet, it does not connect directly to your computer. Element is connected to Canvas in the same way your computer is - if your computer can access Canvas your Element will be able to as well. There are offline workflows available as well.
Q: Will there be an exhaust system on Element?
A: Element will have a combined HEPA and Carbon filter that can be easily replaced (every 6-12 months based on usage).
Q: What is included in the warranty and is there a warranty document?
A: Warranty covers factory defects. Mosaic will ship our replacement parts for user serviceable parts, and will either have the product returned, or send a representative to fix a warranty claim. (Return vs. visit will depend on cost.)
Q: What is, if any, the return or exchange policy for Element?
A: Products can be traded in for credit towards another Mosaic product. There are no returns available for Element (HT). For products outside of warranty coverage, our support team will be available to help but the cost of replacement parts will need to be covered by the customer.
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase. As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment.
If your order is in stock and we process the charges to your credit card, it will ship within five business days from the date of your order. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at sales@Project3DPrinters.com.
Cancellations & Refunds/Returns:
Before accepting a return on a product that isn't functioning as it should, Project 3D Printers reserves the right to exhaust any and all means to resolve and/or repair the malfunction through technical support and replacement parts provided by both the manufacturer and Project 3D Printers. No return will be accepted without reasonable attempts to resolve the issue(s) first. All returned products must be returned within 10 days of date of purchase.
Project 3D Printers enforces a strict "No Returns Accepted" policy for opened and/or partially used products, including filament, resin, or any consumable of any size and weight that has been used or opened from its factory and vacuum seal. Only products and consumables that are unused, and in brand new factory condition are eligible for return to the manufacturer of origin within 10 days of the purchase date.
If a product is found to be non-functional or defective, the product must be returned with its full original contents within 10 days of the delivery date for inspection of the non-functionality. If the product is found to be defective or non-functional a full-refund will be given, not including return shipping at the customer's expense.
All orders cancelled after 48 hours are subject to a $20 administration fee, whether or not your order has shipped. If you order has shipped, you (the buyer) will also be responsible for actual return shipping charges. Refunds will only be issued to the original credit card that you use when placing your order. Buyer is responsible for and pays a 20% restocking of the value of the returned item(s). Buyer pays all shipping fees for the returned item(s).
Customs Fees, Tariffs, Duty Fees and Import Taxes:
Only customers are responsible for their local import taxes, tariffs, duty fees and import taxes incurred during shipping. To know about your customs import duties please contact your local customs office with this details (HS Code :8477 Product description: 3d printer or 3d printer kit). If the tax amount is high, we can provide assistance to reduce it.
We work very hard to ensure that we offer the absolute best prices online. If you find another online store that offers a lower price than us within six months of your purchase date please let us know and we will refund your original payment for the difference. We want you to feel confident that you are getting the absolute best price for the product you are ordering. If you find that our own website has a lower price for the same item you have ordered within six months of your purchase date will refund the difference as well.
To request your partial refund simply e-mail us a link to the same product on our website, or on our competitors website within six months from the date of your order and we will process the credit accordingly.
Our 100% Price Guarantee has some limitations: