
Wiiboox Light 280 LCD Light Curing Resin 3D Printer

Shipping directly from the overseas manufacturer; Please allow 7-10 days lead time for delivery.
This is a Formula One racing car model with a length of 280mm.
Before the launch of Wiiboox Light Pro+ LCD 3D Printer, you could only print this kind of large-size and high-precision 3D model with an industrial-grade SLA 3D Printer, or you would have to lower your requirements on precision to choose the FDM technology. Now, you can have a new choice -- large size, high precision, low-cost investment and easy operation.
T15 Precision Test is a challenge that all Wiiboox Light series LCD 3D Printers must pass before leaving the factory. In this small space of 60*36*3mm, 15 challenging models lined up, especially the T15-7 and T15-8, the smallest space in between is only less than 0.1mm. Many devices have failed in the challenge, but Wiiboox Light passes it with flying colors!
This is a coin-sized model printed by the Wiiboox Light Pro+ LCD 3D Printer, pictures shot by a macro camera. This blooming flower with fine lines in the middle of the grid and a diameter of about 0.1mm, even if it is magnified hundreds of times through the camera lens, it still looks clear, distinct and sharp.If you put it under the light, all the details will be more crystal clearer, and this is what Wiiboox Light 280’s interpretation of fineness and delicacy.
Pour the dental model resin into the Wiiboox Light Pro+, set the printing precision into 0.08mm, place 24 models per layer and 5 layers to full the build volume. That’s 120 dental models in total! And it takes only 16 hours to print all of them. Isn’t it incredible?
Digital Intelligent Manufacturing Solution Using Wiiboox Reeyee 3M & Wiiboox Light Pro+
It takes only 3.5 hours to duplicate this bracelet. After capturing the high-precision 3D data with the Wiiboox Reeyee 3M Blue Light 3D Scanner, we can duplicate the tiger bracelet using the Wiiboox Light Pro+ LCD 3D Printer. Take a look at the dot patterns on the bracelet with a depth of only 0.3mm, which has been faithfully restored no matter in the 3D scanning process or the 3D printing proces. So it’s definitely reliable to use Wiiboox Reeyee 3M and Wiiboox Light Pro+.
9 times of optimized operation logic, 9-week UED design, 6 versions to be picked over, all for achieving a better user experience design. It might not be perfect, but at least it is attentive. Operation steps, file information, printing progress, WIFI control, automatic feeding, and so on, every single detail, we do our best to make it easier for you.
The Wiiboox Light Pro+ LCD 3D Printer is equipped with an intelligent automatic feeding system. When the liquid level sensor detects that the resin is below the bottom limit, the feeding system will automatically run to replenish the resin to a proper height. Of course, if you want to try the feeling of manual refilling, you can manually turn off the auto feeding system, clean the resin tank and pour in new resin. The original resin can be left in the feeding system and used when needed.
(Note: The two resins cannot be mixed)
The Z-axis lifting system of Wiiboox Light Pro+ LCD 3D Printer adopts the high-precision ball screw and linear guide module, which is rare in LCD 3d printers, because the unit cost is 5 times higher than that of using only linear guideway. However, we think it’s worth it. How can we do without paying the price, if we want to be a master?
At present, there are 15 kinds of colorful resins available for the Wiiboox Light Pro+ LCD 3D Printer. With the research and development working day and night, there will be more and more kinds of resins applicable to more and more fields.
You only need to level the platform according to the instructions when the Wiiboox Light Pro+ LCD 3D Printer is running for the first time. The platform will automatically level according to the elastic compensation in subsequent use, so that you don't have to go to the trouble of leveling every time before you start printing.
The Wiiboox Light Pro+ LCD 3D Printer is equipped with the 405nm ultraviolet LED array, whose light uniformity is more than 85%, which can effectively increase the printing success rate and prolong the service life of the LCD module.
The stable and firm structure makes the printing process very smooth. The humanized upturning front cover design brings a wider range of operating space.
Notice: The parameters below are only for your reference.
Machine Size: 400mm(W)*345mm(D)*480mm(H)
Package Size: 520mm(W)*470mm(D)*600mm(H)
Package Weight: 29.4kg
Max. Build Volume: 215mm(W)*135mm(D)*280mm(H)
Printing Speed: 7-9 s / layer (0.05mm)
Printing Technology: LCD Light Curing
Wavelength: 402.5-405nm
Connectivity: USB, Wifi
Operation System: Linux
Software Support: Windows7 or above (64bit), Mac OS 10.14 or above
Screen: Touch Screen
3D Data Format: STL
Supported Material: Rigid Resin, Hard Resin, Tough Resin, ABS Resin, High Temp. Resin, Elastic Resin, Dental Model Resin, etc.
Spot Size: 0.08*0.08mm
Forming Precision: ±0.1mm(L≤100mm)or ±0.1% x L(L>100mm)
Layer Thickness: 0.03, 0.05, 0.1mm
Feeding System: Auto Feeding
Cartridge Capacity: 1kg
Voltage: 110/220V
Power: 160W
The Wilboox Light Pro+ LCD 3D Printer supports printing rigid resin, tough resin, hard resin, casting resin, elastic resin, high temp. resin, etc., and it can be applied in a variety fields like jewelry design, dental orthodontics, DIY action figures and prototype verification.
Model: Automotive Engine Trunking
Model: Gamepad Shell
Material: Rigid resin
Total Weight: 267g
Time: 6 hours and 32 minutes
Advantages: Low heat, High hardness, Suitable for invisible correction and other dental restoration
Model: Peacock
Material: Rigid resin
Total Weight: 216g
Time: 5 hours and 30 minutes
Advantages: Smooth surface, Rich details
Model: Famous architectures
Material: Rigid resin
Total Weight: 260g
Time: 6 hours and 27 minutes
Advantages: Smooth surface, Rich details
Model: Statue of Liberty
Material: Rigid resin
Total Weight: 180g
Time: 4 hours and 26 minutes
Advantages: Smooth surface, Rich details
Model: Gear
Material: ABS resin
Total Weight: 960g
Time: 23 hours and 30 minutes
Advantages: Accurate molding size, Low shrinkage, can be used for design verification
Model: Deer
Material: Rigid resin
Total Weight: 120g
Time: 2 hours and 56 minutes
Advantages: Smooth surface, Rich details
Order Confirmation:
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase. As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment.
Order Shipment:
If your order is in stock and we process the charges to your credit card, it will ship within five business days from the date of your order. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at sales@Project3DPrinters.com.
Cancellations & Refunds/Returns:
Before accepting a return on a product that isn't functioning as it should, Project 3D Printers reserves the right to exhaust any and all means to resolve and/or repair the malfunction through technical support and replacement parts provided by both the manufacturer and Project 3D Printers. No return will be accepted without reasonable attempts to resolve the issue(s) first. All returned products must be returned within 10 days of date of purchase.
Project 3D Printers enforces a strict "No Returns Accepted" policy for opened and/or partially used products, including filament, resin, or any consumable of any size and weight that has been used or opened from its factory and vacuum seal. Only products and consumables that are unused, and in brand new factory condition are eligible for return to the manufacturer of origin within 10 days of the purchase date.
If a product is found to be non-functional or defective, the product must be returned with its full original contents within 10 days of the delivery date for inspection of the non-functionality. If the product is found to be defective or non-functional a full-refund will be given, not including return shipping at the customer's expense.
All orders cancelled after 48 hours are subject to a $20 administration fee, whether or not your order has shipped. If you order has shipped, you (the buyer) will also be responsible for actual return shipping charges. Refunds will only be issued to the original credit card that you use when placing your order. Buyer is responsible for and pays a 20% restocking of the value of the returned item(s). Buyer pays all shipping fees for the returned item(s).
Customs Fees, Tariffs, Duty Fees and Import Taxes:
Only customers are responsible for their local import taxes, tariffs, duty fees and import taxes incurred during shipping. To know about your customs import duties please contact your local customs office with this details (HS Code :8477 Product description: 3d printer or 3d printer kit). If the tax amount is high, we can provide assistance to reduce it.
We work very hard to ensure that we offer the absolute best prices online. If you find another online store that offers a lower price than us within six months of your purchase date please let us know and we will refund your original payment for the difference. We want you to feel confident that you are getting the absolute best price for the product you are ordering. If you find that our own website has a lower price for the same item you have ordered within six months of your purchase date will refund the difference as well.
To request your partial refund simply e-mail us a link to the same product on our website, or on our competitors website within six months from the date of your order and we will process the credit accordingly.
Our 100% Price Guarantee has some limitations: