Skip to content

Zortrax Curing Station

by Zortrax
Original price $4,390.00 - Original price $4,390.00
Original price
$4,390.00 - $4,390.00
Current price $4,390.00
Availability In Stock


Have a Question?

Be the first to ask a question about this.

Ask a Question

Zortrax Curing Station

Zortrax Curing Station is a professional post-processing device which provides UV light exposure required to achieve desired mechanical properties of models 3D printed with photopolymer resins.

Device features:

  • 300 x 200 x 300 mm workspace volume;
  • UV light - 405 nm wavelength;
  • metal chamber with a mirrored surface supporting even light distribution around 3D prints;
  • touch control panel; single color display; on/off button;
  • door opening sensor;
  • UV filter embedded into the front door;


Zortrax Curing Station has been designed to provide necessary UV curing for models 3D printed on a resin 3D printer. UV exposure time is set individually for each supported resin but usually does not exceed a few minutes. It’s dedicated to post-process even the most professional and demanding resins (quality approved by BASF Forward AM and Henkel/Loctite).

Supports most popular resin 3D printing technologies: UV LCD, DLP, and SLA

The curing process is fully automated
Post-processing takes place in a controlled and safe environment to guarantee consistent results.

Soft close door with glass and a layer of UV filter
Together, the two layers ensure the user can safely watch the curing process with no UV radiation getting outside of the curing chamber. The device has a sensor which immediately shuts down the UV lamps when the door is open.

The curing chamber is made with metal sheets polished according to the class EN 10088-2 2P / ASTM No. 8 with mirror finish, which provide uniform UV exposure for the cured models. Consistency of exposure is further enhanced by a rotating table on which the parts being cured are placed. This way, the post-processed models are free of weak spots caused by insufficient UV exposure. A separate system prevents the UV LEDs from overheating.

Zortrax Curing Station was tested along with the Zortrax Inkspire 2 resin 3D printer in thorough validation procedures. In result, both are proven to achieve desired mechanical and thermal properties of chosen BASF Forward AM and Henkel materials when used together.


  • Workspace volume - 300 x 200 x 300 mm (11.8 x 7.9 x 11.8 in)
  • Light source - UV light - 405 nm wavelength
  • UV light power - 75 mW/cm2
  • Chamber - metal with a mirrored surface supporting even light distribution around 3D prints
  • Door - made of a glass layer with a UV filter
  • Display/control panel - touch control panel
  • Security - door opening sensor and UV filter embedded into the front door


  • Device (W x D x H) - 464 x 470 x 501 mm (18.3 x 18.5 x 19.7 in)
  • Weight - 35 kg (77 lb)


  • AC Input - 100 - 240 V AC max 2 A - 120 V
  • Maximum power consumption - 240 W


Zortrax Curing Station, Starter Kit


All information contained in this brochure and specification is subject to change without notice. Each delivered device may have worked up to 20 hours during the quality control test.

Order Confirmation:

As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase.  As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment.  If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail.  If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment.

Order Shipment:

If your order is in stock and we process the charges to your credit card, it will ship within five business days from the date of your order.  We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.  If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at

Cancellations & Refunds/Returns:

Before accepting a return on a product that isn't functioning as it should, Project 3D Printers reserves the right to exhaust any and all means to resolve and/or repair the malfunction through technical support and replacement parts provided by both the manufacturer and Project 3D Printers.  No return will be accepted without reasonable attempts to resolve the issue(s) first.  All returned products must be returned within 10 days of date of purchase.

Project 3D Printers enforces a strict "No Returns Accepted" policy for opened and/or partially used products, including filament, resin, or any consumable of any size and weight that has been used or opened from its factory and vacuum seal.  Only products and consumables that are unused, and in brand new factory condition are eligible for return to the manufacturer of origin within 10 days of the purchase date.

If a product is found to be non-functional or defective, the product must be returned with its full original contents within 10 days of the delivery date for inspection of the non-functionality.  If the product is found to be defective or non-functional a full-refund will be given, not including return shipping at the customer's expense.

All orders cancelled after 48 hours are subject to a $20 administration fee, whether or not your order has shipped.  If you order has shipped, you (the buyer) will also be responsible for actual return shipping charges. Refunds will only be issued to the original credit card that you use when placing your order.  Buyer is responsible for and pays a 20% restocking of the value of the returned item(s).  Buyer pays all shipping fees for the returned item(s). 

Customs Fees, Tariffs, Duty Fees and Import Taxes:

Only customers are responsible for their local import taxes, tariffs, duty fees and import taxes incurred during shipping.  To know about your customs import duties please contact your local customs office with this details  (HS Code :8477 Product description: 3d printer or 3d printer kit). If the tax amount is high, we can provide assistance to reduce it.


We work very hard to ensure that we offer the absolute best prices online.  If you find another online store that offers a lower price than us within six months of your purchase date please let us know and we will refund your original payment for the difference.  We want you to feel confident that you are getting the absolute best price for the product you are ordering.  If you find that our own website has a lower price for the same item you have ordered within six months of your purchase date will refund the difference as well.

To request your partial refund simply e-mail us a link to the same product on our website, or on our competitors website within six months from the date of your order and we will process the credit accordingly.

Our 100% Price Guarantee has some limitations:

  • You must purchase the item from our website before requesting your Price Match Guarantee
  • Promotions such as rebates and buy one, get one free offers are not eligible
  • The item must be in stock on the competitors website
  • The competitor must be an online store, they may not have a retail location
  • The website can not be a discounter or auction website (ie; eBay, overstock, etc..)
  • The competitor must be an Authorized Retailer of the product in question
  • The Price Match Guarantee includes the item price and the shipping charges, it excludes sales tax